Standing up

[copperchange]

I can\'t get my mini to stick to the base! :flame: Any hints and tips??

 

[A Luna]

Get yourself some new glue?

no serious... make sure the model is pinned or glued to a flat surface for more grip so it won\'t fall off.

 

[alextheartist]

BEnd the tab so its bracing itself agaist the sides of the slot.

Alex

 

[mickc22]

what glue are you using for starters?

 

[copperchange]

whew

:bouncy: I was using superglue. I finally got the darn thing to stick. It was one without a flap, but the idea about bending the flap made me look closer at the model. The feet weren\'t even, so only one leg was supporting the weight at a time. I bent the legs just a fraction to match, and then if finally stuck! Whoo!

 

[mickc22]

I always cut the tabs off anyway and pin the feet, as 9 times out of 10 I\'ll make the base first, or have one in mind that it\'s going on

Don\'t put too much superglue on either, if you flood the area with it it won\'t want to stick. An accelerator is helpful

happy gluing