Airbrush compressor and other accessories recommendation

[Gearjock]

So I think I am decided on getting a Paasche TG-3F for my painting needs. However I'm still at a loss for what I should get for a compressor. I don't mind spending between $100-$250 so long as it gets the job done well and isn't going to make me go deaf. Also, any recommendations on other accessories I should get (besides a mask, which I know to get

) are also welcome.

 

[Spacemunkie]

I've got a Talon and it's a decent gun. Only minor gripe is the trigger action which is a bit crunchy, but gets better with use or a bit of careful polishing. It's very versatile thanks to the various nozzles/needles that can be fitted.

I'd recommend a tanked, oil-less compressor. Moisture trap/regulator. You may need to buy some hose adapters. I've used something similar to this for years with no problems:

http://www.trademe.co.nz/art/art-supplies-equipment/other/auction-491484849.htm

I've even got the piddly little tankless version and that works ok too. Just gets a bit spitty with prolonged use.

 

[ktooloo]

http://grexusa.com/grexairbrush/index.php5

Only one model of compressor has a tank, but I've never had a problem using the tankless model (110v). They also sell adapters to fit their airbrushes on any brand compressor hose.

 

[QuietiManes]

The little quiet airbrush and hobby compressors are expensive and under powered. If you look at the top of your price range, you can get a compressor that'll last forever and you'll be able to do anything you want with it. Air tools, spray guns, airbrushing t-shirts, etc, none of which can be done with most hobby compressors that have a max of 30 PSI (20 running).

For example:
http://www.gmcgenerators.com/?page_id=46 <= it's actually compressors, not generators.

Of course, if all you're going to do is occasionally prime and/or base coat a couple models, a $50-$100 hobby jobby will do you very well.

 

[Gearjock]

The device will not be used for anything else but for painting my minis. I plan on using it for full on painting as well as for general basecoating and primer.

 

[airhead]

Home Depot, Lowes, Sears, etc. are your friends here.

Full on painting includes t-shirts? You'll need more air at higher pressures than the little 1/10 & 1/8 HP diaphragms can do.

Get a moisture trap and a regulator. Lots of smaller airbrush compressors have them combined.

I'd personally look for something along the lines of a 1/2 HP pancake model, but both of my right now are hot dog tanks.

Noisy is relative. What is not so bad this afternoon may not be pleasent to the wife at 2:00 a.m.
Get them to plug it in at the store or pay attention to the dB rating.

Feel free to post questions as you go.